Unit Installation And Confi Guration; Installation; Power Supply Connection - IKUSI MAC 201 Manuel D'utilisation

Unit installation and confi guration
The LCD display and the control button are suffi cient for the basic settings of the unit.
Follow the steps indicated below to install the unit and confi gure the various parameters
accessible from the user interface on the LCD display.

Installation

RISK OF DAMAGE TO THE UNIT
Mechanical handling of the unit while
it is switched on may lead to it being
ATTENTION
damaged. Do not plug the unit into the
mains before or during installation.
1) Fit and tighten the bolts and plugs securing
the unit to the wall.
2) Connect the AV1 and AV2 inputs in the re-
spective RCA connectors.
3) You can also connect the coaxial cable from
the RF loopthrough input (connector F).
4) Connect the coaxial cable from the output to
the unit (connector F).

Power supply connection

DANGER OF DEATH OR INJURY
Incorrect unit power connection may
cause an electric shock. Follow the
DANGER
steps below for the electrical installation
of the unit.
1) Connect the earth cable.
2) Connect the power plug to the unit mains
connector.
3) Connect the power plug to the mains socket.
T V + A V
2
3
2
1
1
n
r ib u t io
t o d is t
1 + A V 2 r k
n e t w o
4
3
33
EN