Main Menu - IKUSI MAC 201 Manuel D'utilisation

Unit installation and confi guration

Main menu

NOTE
Over the following pages, the fi eld locating and selection method is primarily
indicated by the "vertical button movement" and "press button" icons. However,
horizontal button movement can be used to locate and select fi elds, as indicated
in the General use of the
1) After switching on the unit the initial display ap-
pears informing of the model, fi rmware version,
output frequency and information on alarms and
status:
Alarms:

A:0 = no alarms

A:X = alarms present

Status:

S:X = status correct

S:0 = status incorrect

2) Press the control button to access the main
menu.
General Settings
In the main menu, locate and select GEN-
1)
ERAL.
IP confi guration
NOTE
The IP confi guration affects the Ethernet interface.
NOTE
To introduce a sequence of digits in the display move the control button vertically
to change the value of the current digit and horizontally to move between digits.
Locate and select the option IP.
1)
Locate and select the option DHCP to
a)
activate (ON) or deactivate (OFF) dynamic
IP assigning. If this is deactivated, a static
IP must be confi gured.
36
/ Main menu
unit.