IKUSI MAC 201 Manuel D'utilisation page 39

Locate and select the option BITRATE.
g)
The unit can be confi gured for a data cod-
ing speed at input of 3 to 8 MBITS/S.
NOTE
If you keep pressing the control button down you will access the information and
confi guration of the second input signal.
Confi guration of the carrier services
Locate and select the option SERVICES.
2)
Locate and select the option CH1 VIDEO
a)
AUDIO. Activate (ON) or deactivate (OFF)
the video and audio signals of the fi rst
input.
Locate and select CH1 LCN. Confi gure the
b)
LCN value of the signal.
Locate and select CH1 NAME. Assign a
c)
name to the signal in CH1.
NOTE
If you keep pressing the control button down you will access the information and
confi guration of the second input signal.
Confi guration of the output signal
NOTE
To introduce a sequence of digits in the display move the control button verti-
cally to change the value of the current digit and horizontally to move between
digits.
NOTE
Position the cursor to the right of the current value and move the control button
vertically to increase or decrease the current value. Hold the control button up or
down to increase or decrease the current value more quickly.
Locate and select the option OUTPUT.
3)
Unit installation and confi guration / Main menu
EN
39