Recommended Abrasive And Diamond Cutting Blade, Specification; Ec Declaration Of Conformity - Husqvarna K970 III Manuel D'utilisation

Recommended abrasive and diamond cutting blade, specification
Cutting blade Max cutting
diameter, inch/ depth, mm/
mm inch
14" (350 mm) 125/5
16" (400 mm) 155/6

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE–561 82 Huskvarna, Sweden, tel: +46–36–146500, declares under sole responsibility that the power
cutter Husqvarna K970 III, K970 III Rescue dating from 2016 serial numbers and onward (the year is clearly stated on
the type plate, followed by the serial number), complies with the requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC.
• of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
• of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according
to Annex V.
For information relating to noise emissions, see the Technical data chapter.
The following standards have been applied: EN ISO 12100:2010, EN ISO 14982:2009, CISPR12:2007+AMD1:2009,
EN55012:2008+A1:2009, EN ISO 19432:2012
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has performed voluntary
type examination in accordance with the machinery directive (2006/42/EC) on behalf of Husqvarna AB. The certificate
has the number: SEC/10/2286.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The
certificate has the number: 01/169/034 - K970 III, K970 III Rescue
Gothenburg 13 January 2016
Joakim Ed
Global R&D Director
Construction Equipment Husqvarna AB
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
TECHNICAL DATA
Blade speed
Blade speed
rating, m/s / ft/
rating, rpm
min
5500 100/19600
4775 100/19600
Blade center Max blade
hole diameter thickness, mm/inch
25,4 mm /1" or
5/0,2
20 mm
25,4 mm /1" or
5/0,2
20 mm
English – 33