Alecto BLX-10 Mode D'emploi page 19

Battery:
1.Slide the battery
cover located in the
front of the baby
amplifi er in a
downward position.
Headphones:
Recording cord:
Please only use the angled plug of the
recording cord.
INSTALLATION
+ -
9
Volt
2.Place a 9 volt battery
(not included) into
the battery compart-
ment as indicated.
19
3.Slide the battery
cover back onto the
Baby Audio Amplifi er.
Connect the supplied headpho-
nes into either one of the two
audio outlets on the BLX-10.
You can attach a second set of
headphones (not included) into
the other power outlet so you
can listen together with your
partner.
You can record the sounds of
your baby by connecting the
recording cord into one of the
audio outlets on the BLX-10.
Connect the other side of the
cord to a recording device
(tape recorder, computer, etc.).
You can connect headphones
to the other audio outlet on the
BLX-10 so you can hear what
you are recording.