Installation; Fitting The Wireless Receiver Fe - BRÖTJE RGTF Instructions De Montage

4. Installation

4.1 Fitting the wireless receiver
FE
Fig. 2: Opening the enclosure
Fig. 3: Mounting the lower part of the enclosure on the wall
136 230 06.11
Risk of electric shock! Prior to commencing any installation work, isolate the boiler
from the power supply and safeguard against unintentional reconnection.
1. Lightly press in the snap fasteners at the bottom of wireless receiver enclosure
(1) and remove enclosure top (2)
3
2. Secure the lower part of the enclosure to the selected place on the wall using
the rawl plugs and wood screws provided (3)
Wireless receiver FE
2
1
1
Installation
21
GB