Toshiba RAV-SM1603AT-E Manuel D'installation page 20

Digital Inverter
<2. Attaching the clamp filter>
Attach the supplied clamp filter to the lower outdoor fan motor lead wire.
• Make sure that the claw of the clamp filter is securely locked.
• Pass the supplied banding band through the upper hole of the clamp filter to clamp it together with the
fan motor lead wire.
• The fan motor lead wires are connected to the connectors CN301 and CN300 on the P.C. board of the
outdoor unit.
19-EN
CN301 CN300
– 19 –
Outdoor Unit Installation Manual
Fan motor lead wire
(Lower side)
Banding band
Clamp filter