Maintenance Instructions - Calira Module B Mode D'emploi

Maintenance instructions

'
Clean the device and the ventilation slots with a dry, lint-free cloth. The device
is maintenance-free. However, if any faults do occur, please proceed as follows.
Fault Action
The battery is not Check all connections from the Module B to the battery,
being charged. pay attention to the correct polarity. Check the fuses and
the mains connection.
The voltage of the Make the connection to the vehicle via the 13-pole
battery has coupling plug. Start the motor and let it run for approx.
dropped below 30 seconds. Battery voltage rises above 1.5 volt. The
1.5 volt. charging process starts automatically.
The maximum The device overheats. Ensure better ventilation of the
charging current is device.
not reached.
The main switch is Set the device to zero voltage: Switch off the device from
not reacting. mains and unclamp the batteries. Clamp the batteries on
again and switch on the mains supply again. Operate the
main switch again.
None of the faults Please contact the manufacturer:
described here Trautmann GmbH & Co. KG
seems to apply. CALIRA-Apparatebau
But the device still Lerchenfeldstr. 9
does not work. D-87600 Kaufbeuren
Service telephone: 0190 / 77 03 80
Internet: www.calira.de
e-mail: info@calira.de
40
Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: 049 (0)8341 9764-0 Fax: 049 (0)8341 67806
/
/
(1.24 /min)