Performance Specifications
MIC
•
Frequency response: 20Hz - 20kHz +/- 0.1 dB.
•
Maximum input level (Gain at Minimum): +16dBu.
•
THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter).
•
Noise: EIN > 125dB (128dB analogue to digital): measured at ~60dB of gain with 150 Ohm termination (20Hz/22kHz
bandpass filter).
LINE
•
Frequency response: 20Hz - 20kHz +/- 0.1dB.
THD+N: < 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter).
•
•
Noise: -90dBu (22Hz/22kHz bandpass filter).
INSTRUMENT
•
Frequency response: 20Hz - 20kHz +/- 0.1dB.
•
THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter).
•
Noise: -87dBu (20Hz/22kHz bandpass filter).
DIGITAL PERFORMANCE
•
Clock sources:
Internal clock.
Sync to word clock Input.
Sync to ADAT Input (ADAT 1 input only).
•
A/D dynamic range 110dB 'A-weighted' (all inputs).
•
D/A dynamic range 110dB 'A-weighted' (all outputs).
•
JetPLLTM PLL technology providing superb jitter reduction for class leading converter performance.
Clock jitter < 250 pico seconds.
•
•
Sample rates: 44.1kHz to 96kHz.
•
Sample rate clock accuracy: +/-20PPM.
ANALOGUE INPUTS
•
Mic / line inputs on XLR combo with auto-switching between mic (XLR) and line / instrument (TRS).
•
Mic / line / instrument 1 & 2: 2 x XLR Combo on rear panel.
•
Mic / line 3-8: 6 x XLR combo.
•
Instrument: As above, switched to instrument (inputs 1 & 2 only).
•
Mic gain: +10dB to + 55dB.
•
Line 1-8 gain: -10dB to +36dB.
•
Instrument gain: +10dB to +55dB.
•
Phantom power switched in 4 channel groups on mic 1-4 and 5-8.
•
Mic and instrument maximum input level +16dBu.
•
Line maximum input level +26dBu.
COMPRESSORS
•
Threshold range: -44dBFS (Max setting) to -4dBFS (Min setting).
•
Compression ratio: Normal - 2:1, More: 4:1.
•
Auto make-up gain: 4dB (min setting), 18dB (max setting).
•
Attack time: 1.2ms, release time: 28ms (-3.5dB method).
•
Compression curve: classic focusrite soft knee.
THD+N (maximum at any compression threshold, input < +16dBu, gain at minimum): < 0.18%
•
13