Yamaha RX-SL100RDS Mode D'emploi page 57

Remote control
Problem
The remote control
Wrong distance or angle.
does not work or
function properly.
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
The batteries are weak.
The manufacturer code was not correctly
set.
Even if the manufacturer code is correctly
set, some models may not respond to the
remote control.
Cause
The remote control will function within a maximum
range of 6 m (20 ft) and no more than 30 degrees off-
axis from the front panel.
Reposition this unit.
Replace all batteries.
Set the manufacturer code correctly.
Try to set the other codes of the same manufacturer.
TROUBLESHOOTING
Remedy
Refer to
page
6
—
3
47
47
55