Publicité
Les langues disponibles
Les langues disponibles
7. Place the wheels assembly (R) into slots and press firmly to
seat in place. Fasten wheel assembly to the tank with two steel
clips and two Phillips head screws. Turn canister over and
place wheels/casters onto solid flat surface.
8. If paper filter or fleece bag is to be used, install as shown (T).
NOTE: Be careful to not tear the bag. Ensure bag is placed
securely on inlet to provide a tight seal for maximum dust
collection performance.
9. Place the vacuum lid onto the container and secure it by
closing the canister locks.
10. Insert the twist-lock connection on the hose (H) into inlet and
rotate clockwise to lock in place.
T
FIG. 4
OPERATION
WARNING: To reduce the risk of serious personal injury,
turn tool off and disconnect tool from power source before
making any adjustments or removing/installing attachments
or accessories.
WARNING: Risk of fire. Do not pick up anything that is
burning, smoldering or smoking such as matches, cigarettes, or
hot ashes.
• Do not use to vacuum combustible explosive materials,
such as coal, grain, or other finely divided combustible
material.
• Do not use to vacuum hazardous, toxic or carcinogenic
materials, such as asbestos or pesticide.
• This vacuum can be converted to meet the EPA lead-related
WARNING: When using electric appliances, always follow
basic safety precautions to reduce the risk of fire, electric shock
and personal injury.
1. Plug the power cord into an
appropriate outlet.
2. Depress on/off switch (D) to
H
turn the unit on.
3. Set the variable suction dial
(E) in the desired position.
See
Suction.
TO SET VARIABLE SUCTION (FIG. 6)
This feature allows the user to control the vacuum's power and
suction. The power level dedicated to the vacuum and the amount
of power going to the tool are controlled.
To determine the correct setting for the vacuum:
1. Determine the amperage of the power tool being used with the
vacuum.
2. Refer to the following chart for the correct variable suction dial
setting.
5
Renovations, Repair and Painting (RRP) Rule for HEPA
vacuum only when used with the D279041H HEPA filter
(included with D27905H).
The D279042F disposable fleece bag is recommended to
lengthen the life of the HEPA filter.
Contact the United States Environmental Protection Agency
(EPA) for more information on their Renovations, Repair
and Painting (RRP) Rule.
FIG. 5
D
To
Set
Variable
E
Maximum Tool
Amperage Rating
3.0 Amps
3.5 Amps
5.0 Amps
Variable Speed
Setting
MAX
1/2
MIN
Publicité
