Télécharger Imprimer la page

AudioSonic CD-576 Mode D'emploi page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
FAMILIARIZE WITH THE DISPLAYED CONTENTS IN THE LCD
1. "PROG" shows during Programming and in programmed play.
2. "RANDOM" shows when in RANDOM playback.
3. "INTRO" shows when in INTRO playback.
4. "WMA" shows when the file played is in WMA format.
5. "MP3" shows when the disc played is an MP3-CD.
6. "CD" shows when the disc played is a CD-DA.
7. "REPT" shows when in various repeat modes.
8. "1" shows together with "REPT" when in single track repeat mode.
9. "DIR" shows together with "REPT" when in album repeat mode.
10. "ALL" shows together with "REPT" when in all tracks repeat mode.
11. This shows when the player reads data from USB data traveller.
12. This shows when player reads data from SD/MMC card.
13. This figure is the album number.
14. This figure is track number of the current album on a MP3 disc or the current
track number on a CD disc.
15. This figure is the elapsed minutes of the track played.
16. This figure is the elapsed seconds of the track played.
17. English Text display. The information of the current track is displayed scrolling
forward in MP3 playback.
1
2
3
4
13
14
17
5
6
7
8
9
10
11
12
15
16
POWER SUPPLY
BATTERY OPERATION
1. Remove the battery compartment cover gently.
2. Install 8 x 'C' size batteries (UM-2 or equivalent) while observing the correct
polarities. (not supplied)
3. Replace the battery compartment cover.
NOTE:
• The AC cord must be detached from the AC socket of the player. (battery use)
• Leaking batteries may damage the battery cabinet and the player as a whole, so
they should be removed from the cabinet when becoming flat or when the player
is not to be played on batteries for some time.
AC OPERATION
Insert the AC cord to the AC socket of the player, and plug the other end to an
applicable wall outlet.
TO PLAY THE RADIO
1. Set the FUNCTION switch to the RADIO position, the POWER Indicator will light up.
2. Select the desired band with the BAND switch.
3. Tune to the desired station by rotating the TUNING control (rotate that control
back and forth until you get the strongest and clearest reception).
4. The built-in AM antenna and external FM TELESCOPICANTENNAare directional.
• When you are receiving an FM broadcast, fully extend the TELESCOPIC ANTENNA
and rotate it for the best reception.
• For AM broadcast, rotate the whole set until the best reception is heard.
5. Adjust the volume level to a comfortable listening level.
6. To turn off the radio, set the FUNCTION switch to the OFF, USB/CARD, CD/MP3/
AUX position.
Instruction Manual
EN
5

Publicité

loading