LINEACCESSORI Meta Voice Manuel D'utilisation page 8

Taking a call/Ending a call
Incoming calls are signalled by the system's standard ring tone. However, depending on
the type of phone used and its status (for example: vibracall mode), the ring tone heard
might not be the standard one but the default setting for that mobile phone.
Take the call by briefl y pressing the button.
At the end of the conversation, end the call by briefl y pressing the button.
Rejecting a call
You can reject an incoming call by briefl y pressing the button twice.
Last number redial
Redial by briefl y pressing the button twice.
Privacy mode
During a call, press and hold the button down to disable the hands free set and the call will
be transferred to the telephone. You can return to hands free mode by holding the button
down again.
Answer call
Reject call
(with ring on hands free)
End call
Redial last number
Voice call
Call waiting
(with call in progress)
Transfer
(privacy/hands free and vice versa)
Please refer to the telephone's operating manual for further details.
5040279200 Man.Meta Voice FT/LA/8 8 5040279200 Man.Meta Voice FT/LA/8 8
Table of available commands using the button/led
Press briefl y (< 1 s.)
Press briefl y twice (two presses in max
time of 2 s.)
Press briefl y (< 1 s.)
Press briefl y twice (two presses in max
time of 2 s.)
Press and hold (> 3 s.)
Press briefl y twice (two presses in max
time of 2 s.)
Press and hold (> 3 s.)
Adjusting the sound level
While you are taking a phone call, you can adjust the sound level,
if necessary, by simply pressing the + and – keys at the side of the
led/switch.
The system will increase or decrease the volume each time you press
one of these.
You can also adjust the volume using the telephone's controls.
26-04-2010 13:37:12 26-04-2010 13:37:12