Always refer to the operating manual for your mobile phone for details how to pair
up devices.
Once the mobile phone has located the device, identifi ed with the name Meta Voice, enter
1234 when the link up code is requested.
The mobile phone display will show information relating to the pairing and connection will
be made based on the typical settings of each model of mobile phone.
The system is able to hold up to 4 paired devices in operation: it is not necessary to repeat
the pairing procedure for the last 4 paired mobiles phones every time you switch the vehi-
cle's dashboard, or the telephone, on or off .
Once 4 mobile phones have been paired up, it is still possible to pair up an additional
mobile phone. This will take the place of the fi rst paired phone in the list of paired phones
stored in the appliance's memory. Should the fi rst paired telephone also be the last one
that was recognised, the newly paired phone will take the place of the second phone in
the list of paired phones.
Recognition
Recognition: procedure for physically recognising the devices without the use of wires so
the system is able to work (Meta Voice module + gsm phone)
Recognition after the key contact has been switched on and any subsequent recognition,
is signalled by 1 tone issued by the loudspeaker and the LED, which remains lit without
fl ashing. Once recognition has been established, the hands free set can be used.
Recognition takes place with one of the mobile phones previously "paired up" with the
Meta Voice module, provided this has also been switched on and is within the "range" of
the system (5 meters). Should TWO (or more) "paired" mobile phones be in range when the
key contact is switched on, only ONE of the two (or more) will be recognised according to
the order of priority stored by the device.
The way the system operates depends on the type of mobile phone used. Always refer to
the operating manual for more detailed information.
Please note, in particular, that some types of mobile phone require you to enable auto-
matic reconnection of the hands free set, whilst this operating mode is always active with
other models.
Voice calls
To place voice calls, this function must be supported by the type of mobile phone you are
using.
Always refer to the operating manual for your mobile phone for instructions how to
store voice tags.
Voice call mode is activated by pressing and holding the button down.
Access to voice call mode is signalled diff erently depending on the type of mobile phone
you are using. Always refer to the operating manual for your mobile phone.
Once you have pronounced the voice tag for the number to call, it is repeated (provided it
has been identifi ed correctly) and the call is then placed. If not, you will get the recognition
failure signal, which depends on the type of mobile phone you are using.
However, use of the mobile phone's keypad is always a preferable method for placing cal-
ls.
5040279200 Man.Meta Voice FT/LA/7 7
5040279200 Man.Meta Voice FT/LA/7 7
26-04-2010 13:37:12
26-04-2010 13:37:12