Installation Instructions; Flow Diagram - Hansgrohe 1355018 Série Mode D'emploi / Instructions De Montage

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal pres-
sures.

Installation Instructions

• Prior to installation, inspect the product for transport
damages.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• There must be an access door for maintenace.
It will be recommended that the faucet will be con-
nected with solid pipes.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
Connections G 1/2:
The product is exclusively designed for drinking water!
4
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
max. 70°C
65° C
max. 70°C / 4 min
cold right - hot left
Assembly (see page 31)
English
Symbol description
Do not use silicone containing acetic acid!
Pipe interrupter (see page 32)
Dimensions (see page 33)

Flow diagram

(see page 33)
free flow


Spare parts (see page 35)
Test certificate (see page 36)
Maintenance
• The check valves must be checked
• To guarantee the smooth running of the
Outlet 1
Outlet 2
regularly according to DIN EN 1717 in
accordance with national or regional
regulations (at least once a year).
thermostat, it is necessary from time to
time to turn the thermostat from total hot
to total cold.