Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Notes on continuous
flashes
If this flash unit fires in quick
succession for a short period of
time, its built-in safety circuit will
be triggered to suspend flash
firing. On the LCD panel,
displayed.
In addition, if the temperature
inside the flash unit rises further,
(overheat indicator) will light
on the LCD panel to indicate that
flash firing is disabled for a while.
In such a case, turn off the power
switch on the flash unit and leave
the flash unit unused for about 20
minutes to let it cool down.
Continuous flashes heat up the
batteries inside the flash unit. Take
extra care when you remove the
batteries.
/
is
GB
GB
17
Publicité
Chapitres
Table des Matières
