Pioneer DRM-7000 Mode D'emploi page 27

NOTE:
The DRM-7000/DRM-3000 is designed so as to prohibit the
use of maintenance submodes from the host computer. Note
that while it is possible to enter system administrator mode
even though the use of these submodes is prohibited, only
the information submodes will be able to be used.
System administrator mode settings screen are displayed in
the sequence indicated below.
Inquiry submode
Press « key
Config submode
Press « key
Option submode
Press « key
Info submode
Press « key
Mailslot submode
Press « key
Hyper submode
Press « key
Probe submode
Press « key
Door submode
Press « key
Pressing the ESC key when in inquiry submode will cause
the system to return from system administrator mode to user
mode.
Press » key
Press » key
Press » key
Press the ENT key
Press the ENT key to select
Press » key
a category and then press
the ENT key again
Press the ENT key to select
the operation to be
Press » key
performed and then press
the ENT key again
Press » key
Press » key
Press » key
Press » key
Auto probing
Press « key Press » key
Hot start
Press « key Press » key
Auto eject
Press « key Press » key
Hyper I/E
Press « key Press » key
Alert buzzer
Press « key Press » key
Free message
Press « key Press » key
Inquiry change
Press « key Press » key
Fan NG message
Press « key
NOTES:
¶ Do not change the setting of the Inquiry change
function. Units are preset at the factory to DRM-
7000 (for DRM-7000 model) and DRM-3000 (for
the DRM-3000 model).
¶ Do not change the setting of the Fan NG
message function. Units are set to factory
default of ON.
Log
Contents
Run-statistics
Swap
Remove
Add
Operation
27
<DRC1285>
En