Dedicated Usage; Dangers; Places For Use - GLW MC25 Mode D'emploi

SAFETY

Dedicated usage

Use the mc 25 only for automatic stripping and crimping.
End sleeves with cross-sections ranging from 0.5 to 2.5 mm
used.
Only the intended PVC insulated cables may be inserted into the funnel guide of the mc 25. Never
insert solid metal parts or items. The stripping knifes would be damaged.
Third party reconstruction and changes of the mc 25 beyond retooling are not allowed because of
safety!
Observing of all information in compliance with the working conditions belong to the
!
dedicated application!

Dangers

Use the mc 25 only when the cover is closed.
Before carrying out any work at opened cover (e.g. retooling, maintenance work) disconnect the
mc 25 from the mains supply.
Make sure that no strange objects are inside the case.

Places for use

Avoid operation and keeping at
 damp or dusty places,
 places exposed to high or low temperatures or direct sunlight (Operating temperature range: 15
C to 35 C).
Condensation can form when moving from a cold to a warm place.
Open cover to evaporate condensation before using the mc 25.
Do not spill any liquids over the mc 25.
Protect the mc 25 from heavy vibrations and jolts.
2
2
and a strip length of 8 mm must be
10/12