Philips GC1900 Série Mode D'emploi page 17

Problem
Water drips
from the
soleplate after
the iron has
cooled down
or has been
stored.
Water spots
appear on the
garment
during ironing.
Possible cause
You have put the
iron in horizontal
position while there
was still water in
the water tank.
These wet spots
may be caused by
steam that has
condensed onto
the ironing board.
If the underside of
the ironing board is
wet, wipe it dry
with a piece of dry
cloth.
EnGlish
Solution
Empty the water tank and set
the steam control to position O
after use. Store the iron on its
heel.
Iron wet spots without steam
from time to time to dry them.
To prevent steam from
condensing onto the ironing
board, use an ironing board with
a wire mesh top.
17