Philips GC1900 Série Mode D'emploi page 12

EnGlish
12
To keep the soleplate smooth, avoid hard contact with metal objects.
Never use a scouring pad, vinegar or other chemicals to clean the
soleplate.
4 Clean the upper part of the iron with a damp cloth.
5 Regularly rinse the water tank with water. Empty the water tank
after you have rinsed it (Fig. 12).
Double-active Calc system (specific types only)
Note: See chapter 'General description' for the type numbers that are
equipped with the Double-Active Calc System.
The Double-Active Calc System consists of an Anti-Calc tablet inside the
water tank combined with the Calc-Clean function.
- The Anti-Calc tablet prevents scale from clogging the steam vents.
The tablet is constantly active and does not need to be
replaced (Fig. 13).
- The Calc-Clean function removes scale particles from the iron.
Calc-Clean function
Use the Calc-Clean function once every two weeks. If the water in your
area is very hard (i.e. when flakes come out of the soleplate during
ironing), use the Calc-Clean function more frequently.
1 Make sure the appliance is unplugged.
2 Set the steam control to position O.
3 Fill the water tank to the maximum level.
Do not pour vinegar or other descaling agents into the water tank.
4 Set the temperature dial to MAX (Fig. 14).
5 Put the mains plug in an earthed wall socket.
6 Unplug the iron when the temperature light goes out.
7 Hold the iron over the sink and turn the steam control to the
Calc-Clean position x. (Fig. 15)