Philips GC1900 Série Mode D'emploi page 10

EnGlish
10
Do not set the steam control to a steam setting if you have set a
low ironing temperature (below 2/ WOOL setting) or when the iron
is still heating up (as long as the temperature light is on). Otherwise
water will leak from the iron.
4 When the temperature light goes out, wait a while before you start
ironing.
During ironing, the temperature light goes on from time to time.
,
This indicates that the iron is heating up to the set temperature.
5 Set the appropriate steam setting. Make sure that the steam setting
you select is suitable for the set ironing temperature:
- O for no steam (for all temperature settings). (Fig. 2)
- small cloud for minimum steam (temperature settings 2 and
3. (Fig. 6)
- large cloud for maximum steam (temperature settings 3 to
MAX. (Fig. 7)
Features
spray function (specific types only)
You can use the spray function at any temperature to moisten the article
to be ironed. This helps remove stubborn creases.
1 Make sure that there is enough water in the water tank.
2 Press the spray button several times to moisten the article to be
ironed (Fig. 8).
steam boost function (specific types only)
A powerful boost of steam helps to remove very stubborn creases.
The steam boost function only works at temperature settings between
3 and MAX.
1 Press and release the steam boost button (Fig. 9).