Illumination Settings; Mixtrax Settings - Pioneer DEH-X8700BH Mode D'emploi

ILLUMINATION settings

Menu Item
Color Setting
[Key Side], [Display Side], [Key &
Display]
Dimmer Setting
[Sync Vehicle Illumi], [Sync Clock],
[ON], [OFF]
Brightness
[1] to [10]
Phone Color
[Flashing]
[Flash FX 1] to [Flash FX 6]
[OFF]
Illumi Effect
[ON], [OFF]
20
En
Description
Select color for the keys/display of the unit from
12 preset colors, [Scan] or [Custom]*.
• [Scan]: Cycle through a variety of colors
automatically.
• [Custom]*:
1 Press and hold the M.C. dial until the color
setting display appears.
2 Set the primary color (R (red)/G (green)/B
(blue)) and brightness level ([0] to [60]).
You cannot select a level below 20 for all three
of R (red), G (green), B (blue) at the same time.
You can also customize the preset colors. Select
one of the preset colors, then press and hold the
M.C. dial until the color setting display appears.
* The Custom setting is only available for [Key Side]
and [Display Side].
Change the display brightness.
Change the display brightness.
The available setting ranges differ depending on
[Dimmer Setting].
Select the key color when a call is received.
Applies the color set by [Key Side].
Cycle through a variety of colors automatically.
No change in key color made.
The illumination effect can be seen when;
– there is an incoming call
– you are on the phone
– a CD is inserted/ejected

MIXTRAX settings

Menu Item
SHORT PLAYBACK
[1.0 MIN], [1.5 MIN], [2.0 MIN],
[2.5 MIN], [3.0 MIN], [Random],
[OFF]
FLASH AREA
[Key & Display], [KEY SIDE], [OFF]
Flashing Color
[Sound Level Mode Color 1] to
[Sound Level Mode Color 6]
[Low Pass Mode Color 1] to [Low
Pass Mode Color 6]
[Flashing Color Random]
[Sound Level Mode Random]
[Low Pass Mode Random]
DISP EFFECT
[MIXTRAX 1], [MIXTRAX 2], [OFF]
CUT IN EFFECT
[ON], [OFF]
MIX Settings
[MIX Fixed], [LOOP EFFECT],
[Flanger EFFECT], [Echo EFFECT],
[Crossfade EFFECT], [Crush EFFECT]
Description
Select the length of the playback time.
Select the area for the illumination effect.
When [OFF] is selected, the color set under the
ILLUMINATION settings (page 20) is used as the
display color.
Change the illumination effect according to
the sound and bass level.
The flash pattern changes according to the
sound level.
The flash pattern changes according to the
bass level.
The flash pattern changes randomly according
to the sound level mode and low pass mode.
The flash pattern changes randomly according
to the sound level mode.
The flash pattern changes randomly according
to the low pass mode.
Set the MIXTRAX special effects on/off.
Turn the MIXTRAX sound effects on/off while
manually changing the tracks.
Set fixed sounds or sound effects for the
MIXTRAX special effects.
[Flanger EFFECT], [Crossfade EFFECT] and
[Crush EFFECT] are not available when;
• [iPod] is selected as the source.
• The FLAC file is played back.