Setting A Timer Recording - Samsung DVD-R130 Manuel De L'utilisateur

Setting a Timer Recording

You need to set the Clock (Setup – Clock Set) before
proceeding with a timer recording. (See page 29)
1
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the disc
tray.
Wait until "LOAD" disappears from the front panel
display.
If an unused DVD-RW disc is inserted, whether to
initialize or not will be asked first. (See page 44.)
3
Press the MENU button in Stop mode.
You can also set a timer recording via the TIMER button.
4
Press the ... ... † † buttons to select Timer Rec., and
then press the ENTER or √ button.
DVD-Recorder
DVD-RW(VR)
Title List Timer Record
Scheduled Record List
Playlist
Disc Manager
Timer Rec.
Setup
MOVE ENTER
5
Press the ... ... † † buttons to select Timer Record,
and then press the ENTER or √ button.
The Timer Record Input items are displayed.
DVD-Recorder
DVD-RW(VR)
No. Source Date
No. 01
Source Date Start
CH 11 01/01 12:03 AM
Recordable Time : 01:59 SP
Recordable Time : 01:59 SP
MOVE ENTER
6
Fill in the items using the ... ... † † œ √ buttons.
œ √
: Moves to the previous/next item,
... ... † †
0~9 : Sets a value.
50 - English
Timer Record
√ √
√ √
RETURN EXIT
Scheduled Record List
Current Time 12:03 AM
Start End Mode Edit
End Mode
02:03 AM SP
RETURN EXIT
• Source: Select the video input source (AV 1, AV 2) or the
broadcasting channel you want to make a timer recording
of. When selecting channels to be recorded, the ...† buttons
on the remote control can let you select only the channels
that have been memorized during Auto Channel Memory.
For the selection of other channels, use the number buttons.
• Date: Date that the timer recording starts
01/01
01/02
01/30
01/31
• Start/End Time: Start and end time of the timer
recording
• Mode (Record mode)
XP : Approx. 1 hour
SP : Approx. 2 hours
LP : Approx. 4 hours
EP : Approx. 6 hours or 8 hours.
FR : See page 51.
s When you are recording at EP mode on a
DVD-RW(V)/-R disc, it may not record the full 6
NOTE
or 8 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING system.
For example, if you record a Program with a lot
of action, it uses a higher bit rate which in turn
consumes more disc memory.
7
Press the ENTER button.
DVD-Recorder
DVD-RW (RW)
No. Source Date
01 CH 11 01/ 01 05:00 AM
02 /
Recordable Time : 01:59 SP
MOVE ENTER
• ( ) and Timer Set will appear on the front panel
display. This means that a timer recording is set.
• Recording is automatically performed when the set time
is reached.
If the timer settings overlap
s
The programs are recorded in order of priority.
NOTE
If timer recording is set for the first program
and then again for the second program and
both programs overlap, the following message
will appear on the screen: 'This setting is
identical with 1.' The message shows that the
first program has priority.
After recording of the first program is complete,
the second program starts being recorded.
To exit without saving the current setting
s
Press the MENU or TIMER button.
s To return to the previous menu
Press the RETURN button if you don't want to
set a timer recording.
MON-FRI
Every SAT
Every SUN
Scheduled Record List
Current Time 12:03 AM
Start End Mode Edit
07:00 AM SP √ √
: : √ √
RETURN EXIT