Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
revised 08/2018
FUSE CHECK/REPLACEMENT/RESET
Fuse Check/Reset
1.
Drive the machine on a level floor.
2.
Engage the parking brake.
3.
Turn the ignition key (57) to "O" and remove it.
4.
On the panel (38), check for deactivation of one of the following fuses (Fig. 8):
•
(A): F1 (10 A), dust vacuuming
•
(B): F2 (10 A), filter shaker
•
(C): F4 (16 A), ignition key
•
(D): F5 (10 A), motor auxiliary
•
(E): F3 (2 A), dust guard system (if equipped)
•
(F): F6 (10 A), working lights (optional)
•
(G): F8, cab blower (optional)
Reset any deactivated fuse, when the component that caused deactivation has fully cooled down.
Fuse and lamellar fuse check/replacement
1.
Drive the machine on a level floor.
2.
Engage the parking brake.
3.
Turn the ignition key (57) to "O" and remove it.
4.
Open the fuse box cover (23).
5.
Check the following fuses for integrity:
•
(A, Fig 11): Main pump motor fuse F0 (250 A)
•
(B): Auxiliary circuit lamellar fuse F10 (30 A) (B)
Replace any open fuse.
6.
Close the fuse box (23).
A
B
C
01/2009
E
D
G
F
Figure 10
INSTRUCTIONS FOR USE
P100338
33019318 - SR 1601
B
A
Figure 11
ENGLISH
P100339
29
Publicité
Chapitres
Table des Matières
Dépannage
