Teac CR-H700 Mode D'emploi page 23

To check the programmed order
In the stop mode, press the PROGRAM button
repeatedly. The track/file number and programme
number will be shown on the display.
To change or add a track/file to the
programme
In the stop mode, press the PROGRAM button
repeatedly until the program number that contains
the track/file you want to change appears on the
display. Then select a track/file using the scroll buttons
(5/b). The previous track/file is replaced with the
newly selected one.
If you want to add a track/file to the end of the
programme, press the PROGRAM button repeatedly
until "P-END" briefly appears on the display. Then
select a track/file using the scroll buttons (5/b). The
track/file is added to the programme.
To delete a track/file from the
programme
In the stop mode, press the PROGRAM button
repeatedly until the programme number of the file to
be deleted appears on the display, and then press the
CLEAR button. The selected track/file is deleted from
the programme.
To clear the programme
1. In the stop mode, press the PROGRAM button.
2. Hold down the CLEAR button for more than 4
seconds.
< In the following cases, the programmed contents will
also be cleared:
pressing the STANDBY/ON button
opening the disc tray
disconnecting the AC power cord
23