Clearing The Program; Exiting Program Mode - Teac AD-RW900 Mode D'emploi

Checking the program order
Press repeatedly
When playback is stopped, press the PROGRAM button repeatedly.
The numbers of the programmed tracks/files and their program
numbers will be shown in order.
Deleting tracks/files from the program
When playback is stopped, press the PROGRAM button repeatedly
until the program number of the track to be deleted
appears on the display.
Press repeatedly
Example:
Press the CLEAR button.
The track/file is deleted from the program.
Program number
to be deleted

Clearing the program

more than 1 sec.
When playback is stopped, press the PROGRAM button, followed
by the CLEAR button more than 1 second.
The PROGRAM indicator disappears and all the contents of the
program are cleared.
< If the PROGRAM indicator is not shown, press the PROGRAM
button to activate program mode before pressing the CLEAR
button.
< If one of the following buttons is pressed, the contents of the
program are also cleared.
In CD mode
POWER, CD OPEN/CLOSE (L), SOURCE
In USB mode
POWER, SOURCE

Exiting program mode

When playback is stopped, press and hold the CD/USB Stop (H)
button. The PROGRAM indicator will disappear.
< This does not clear the contents of the program. Press the
PROGRAM button again and then press the CD/USB Play/Pause
(t/J) button if you want to restart program playback.
Hold down
27