Teac AD-RW900 Mode D'emploi page 47

4
Set the CD-TAPE-USB switch to TAPE.
< This unit cannot record to CDs and USB flash drives with the
timer recording.
5
Set the OFF-PLAY-REC switch to the REC position.
"TIMER" and appear on the AD-RW900's display.
6
Tune in the station that you want to record (when
recording from radio).
7
Set the audio timer to your desired start (power on) and
stop (power off) times.
When this setting is completed, the power to all components
will be switched off.
At this time, do not press the AD-RW900 POWER button.
Leave the button pushed in (the on position). If the
POWER button is in the off position, timer recording will
not function.
When the preset start time is reached, power will be supplied
and recording will start automatically.
< When you do not want to use the timer, be sure to set the OFF-
PLAY-REC switch to the OFF position to prevent accidentally
recording over an important cassette tape.
47