Clearing The Program; Exiting Program Mode - Teac AD-800 Mode D'emploi

Checking the program order
When playback is stopped, press the PROGRAM button repeatedly.
The numbers of the programmed tracks/files and their program
numbers will be shown in order.
Deleting tracks/files from the program
When playback is stopped, press the PROGRAM button repeatedly
until the program number of the track to be deleted
appears on the display.
Press the CLEAR button.
The track/file is deleted from the program.
Press repeatedly
Press repeatedly
Program number
to be deleted

Clearing the program

When playback is stopped, press the PROGRAM button, followed
by the CLEAR button or CD/USB Stop ( ) button more than 1
second.
The PROGRAM indicator disappears and all the contents of the
program are cleared.
If the PROGRAM indicator is not shown, press the PROGRAM
button to activate program mode before pressing the CLEAR
button.
If one of the following buttons is pressed, the contents of the
program are also cleared.
In CD mode
POWER, CD OPEN/CLOSE ( ), SOURCE
In USB mode
POWER, SOURCE

Exiting program mode

When playback is stopped, press and hold the PROGRAM button
more than 1 second. The PROGRAM indicator will disappear.
This does not clear the contents of the program. Press the
PROGRAM button again and then press the CD/USB Play (
button if you want to restart program playback.
Hold down
more than 1 sec.
Hold down
more than 1 sec.
23
)