Teac AD-800 Mode D'emploi page 29

Masquer les pouces Voir aussi pour AD-800:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1
Connect an external USB storage device to the USB port
of this unit.
You cannot record to an external USB storage device if there is
no free space or the device is locked.
Before recording, check the remaining capacity of the USB
storage device using a PC. You cannot check the remaining
memory capacity with this unit.
2
Press the SOURCE button repeatedly to select the source
to be recorded (CD, TAPE, or LINE).
3
Press the RECORD USB button to start recording standby.
The red indicator above the RECORD USB button and the
icon on the display blink.
To stop recording, press the USB Stop ( ) button.
4
(When recording from a tape or an external source)
Adjust the recording level.
Before recording, adjust the recording level. Failure to do so
could cause the recorded sound to be distorted or noisy.
1. Play the source (cassette tape or external source) to be
recorded.
2. Use the REC LEVEL knob to adjust the recording level so that
the loudest sound never lights the "OVER" indicator on the
peak level meter.
Different sources to be recorded have different volumes. In
order to record at the optimal volume for each source, it is
necessary to adjust the recording level for each source.
When recording from a CD, the recording level does not need
to be changed, and it cannot be adjusted.
5
Prepare the recording source.
Recording from a CD
To record all the tracks/files on a CD, stop the disc first. To record
only some of the tracks/files on a CD, pause at the beginning of
the part that you want to record.
You can also record tracks in programmed order. For information
about how to set the program, see page 21.
Continued on the next page
29

Publicité

Table des Matières

Dépannage

loading

Table des Matières