Hd Radio™ Technology/Radio; Receiving Preset Stations; Best Stations Memory (Bsm) - Pioneer DEH-X8800BHS Mode D'emploi

HD Radio™ Technology/Radio
(HD Radio™ Technology is only available for DEH-
X8800BHS/X7800BHS.)
(Radio is only available for DEH-X6800BS/MVH-X580BS.)
The tuner frequencies on this unit are allocated for use in North America. Use in other
areas may result in poor reception.
About HD Radio™ stations
HD Radio™ stations offer high-quality audio and data services. HD Radio stations are
brought to you by local FM/AM stations.
HD Radio stations feature the following:
– High quality audio
– FM multicasting
– Data services
AM band
Analog AM
Analog AM Digital AM
FM band
Analog FM
Analog FM Digital FM
Analog FM
Digital FM-1 ch
Digital FM-2 ch
Digital FM-3 ch
Program Service Data: Contributes to the superior user experience of HD Radio
Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other
relevant data streams.
Adjacent to traditional main stations are extra local FM channels. These HD2/HD3
Channels provide new, original music as well as deep cuts into traditional genre.
Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast
a clean digital signal. AM sounds like today's FM and FM sounds like a CD.

Receiving preset stations

1
Press SRC/OFF to select [HD RADIO] or [RADIO].
2
Press BAND/ to select the band from [FM1], [FM2], [FM3] or [AM].
3
Press a number button (1/ to 6/
NOTE
You can select a preset channel by pressing
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 19).

Best stations memory (BSM)

The six strongest stations are stored on the number buttons (1/
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press
Press and hold / then release to seek an available station. Scanning stops
when the unit receives a station. To cancel seek tuning, press
NOTES
• [SEEK] needs to be set to [MAN] in the FUNCTION settings (page 19).
• Depending on the reception status, seek tuning can be changed between digital station seek and all
station seek (page 19) (only for DEH-X8800BHS/X7800BHS).
To store stations manually
1
While receiving the station you want to store, press and hold one of the number
buttons (1/ to 6/ ) until it stops flashing.
NOTE
You can select a preset channel by pressing
press and hold the M.C. dial to store a station.
).
and turning the M.C. dial.
to 6/ ).
/ to select a station.
/ .
and turning the M.C. dial. After selecting a channel,
7
En