Typical Applications; Installation; Electrical Connections; Maintenance / Cleaning - Vortice VORT PENTA EP Notice D'emploi

ENGLISH
Extract Ventilation rates
For U.K. Market only:
The product is designed to Comply with U.K. Building
Regulations Approved Document F1: Means of
Ventilation System 3 – Continuous mechanical
extract.
The installation rates are:
** As an alternative for Sanitary accommodation
ONLY. An opening window equal to 1/20th of the floor
area may be used instead.
The whole building ventilation rates are:
a. In addition, the minimum ventilation rate should be
not less than 0.3 l/s per m2 internal floor area (this
includes each floor, e.g. for a two-storey building, add
the ground and first floor areas.
b. This is based on two occupants in the main
bedroom and a single occupant in all other
bedrooms. This should be used as the default value.
If a greater level of occupancy is expected, then add
4 l/s per occupant.
The product should be used in conjunction with
Vortice Flexible Aluminium Ducting or Vortice Rigid
Modular Plastic Ducting.

Typical applications

Fig. 6÷8

Installation

Fig. 9÷15

Electrical connections

Fig. 16÷19

Maintenance / cleaning

Fig. 20÷27
NOTE
This appliance must be connected during
installation to the accompanying control box, from
which all the relative functions and settings are
selected
Important information
concerning the environmentally
compatible disposal
IN CERTAIN EUROPEAN UNION COUNTRIES
THIS PRODUCT DOES NOT FALL WITHIN THE
REQUIREMENTS OF THE NATIONAL LAWS IM-
PLEMENTING DIRECTIVE WEEE, AND IN THESE
COUNTRIES THE PRODUCT IS NOT SUBJECT TO
SEPARATE DISPOSAL OPERATIONS AT THE END
OF ITS WORKING LIFE.
This product conforms to EU Directive2002/96/EC.
This appliance bears the symbol
of the barred waste bin. This indi-
cates that, at the end of its useful
life, it must not be disposed of as
domestic waste, but must be
taken to a collection centre for
waste electrical and electronic
equipment, or returned to a retai-
ler on purchase of a replacement.
It is the user's responsibility to dispose of this ap-
pliance through the appropriate channels at the end
of its useful life. Failure to do so may incur the pe-
nalties established by laws governing waste dispo-
sal.
Proper differential collection, and the subsequent re-
cycling, processing and environmentally compatible
disposal of waste equipment avoids unnecessary
damage to the environment and possible related he-
althrisks, and also promotes recycling of the mate-
rials used in the appliance.
For further information on waste collection and di-
sposal, contact your local waste disposal service, or
the shop from which you purchased the appliance.
Manufacturers and importers fulfil their responsibili-
ties for recycling, processing and environmentally
compatible disposal either directly or by participating
in collective systems.
9