After-Sales Service And Application Service - Bosch AMW FS Notice Originale

OBJ_BUCH-2376-002.book Page 14 Thursday, October 20, 2016 11:53 AM
14 | English
Problem Possible Cause
Machine leaves ragged fin- Grass too high/dense
ish and/or labours
Cutting blade blunt
Cutting blade obstructed
Nut cannot be removed to Damaged thread on nut/shaft
release cutting blade
Locking pin not located correctly
Cutting blade fails to ro- Cutting blade obstructed
tate
Blade nut loose
Grass too high/dense
Poor cutting performance Cutting guard encrusted with debris
Cutting blade blunt
Poor motor performance
If you are unable to resolve the problem using the troubleshooting guide then please contact your dealer in the first instance.
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
F 016 L81 371 | (20.10.16)
Corrective Action
Grass too high: Cut in stages
Grass too dense: Reduce rate of cutting every
time
Flip/replace blade
Check underneath the machine and clear out as
necessary (always wear protective gloves)
Lubricate shaft to aid removal
Reinsert locking pin and apply light pressure
whilst rotating shaft
Check underneath the machine and clear out as
necessary (always wear protective gloves)
Tighten nut ensuring the blade, rider plate and
dome washer are all present and central (al-
ways wear protective gloves) (see figure 3)
Grass too high: Cut in stages
Grass too dense: Reduce rate of cutting every
time
Clean inside of cutting guard
Flip/replace blade
Remove cutting system and slip plate and clean
slip plate groove
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Bosch Power Tools