Issue Functions; Add-Up Mode - KERN and SOHN TFKB 6K-5-A Mode D'emploi

14.4 Issue functions

14.4.1 Add-up mode < sum >
With this function the individual weighing values are added into the summation memory
by pressing a button and edited, when an optional printer is connected.
Activate function:

In Setup menu invoke the menu setting < Print sum> and confirm with
button .

Use the navigation keys  to select the setting < on > and confirm with  button.

To exit the menu press the navigation key  repeatedly
Condition: Menu setting prmode  manual  on >
Add-up weighed goods:

If required, place empty container on scale and tare.

Place first good to be weighed on balance. Wait until stability display (
appears and then press the PRINT button. The display changes to < sum1 >,
followed by the current weighing value. The weighing value is stored and edited by
the printer. The symbol ∑ pops up. Remove the weighed good.

Place second good to be weighed on balance. Wait until stability display (
appears and then press the PRINT button. The display changes to < sum2 >,
followed by the current weighing value. The weighing value is stored and edited by
the printer. Remove the weighed good.

Add-up more weighed goods as described above.

You can repeat this process until the capacity of the scales is exhausted.
Display and edit sum „Total":

Press the PRINT key long time. The number of weighings and the total weight are
edited. The sum memory is deleted; the symbol [.∑.] extinguishes.
FKB-BA-e-2111
)
)
37