When Connecting The External Video Component; Din Front/Rear Mount - Pioneer DVH-340UB Manuel D'installation

Connections
When using a display
connected to video outputs
WARNING
Never install the display in a location where it is
visible to the driver while driving.
Display with
RCA input jacks
To video input
RCA cable
(sold separately)
Video output
(VIDEO OUTPUT)
This product
15 cm
When connecting the
external video component
It is necessary to set V.INPUT to AUX in initial
settings when connecting the external video
component.
External video component
(sold separately)
To video
To audio
output
output
RCA cable
(sold
RCA cable
separately)
(sold
separately)
Video input
(VIDEO INPUT)
15 cm
This product
Audio input
Installation
Important
! Check all connections and systems before
final installation.
! Do not use unauthorized parts as this may
cause malfunctions.
! Consult your dealer if installation requires
drilling of holes or other modifications to the
vehicle.
! Do not install this unit where:
— it may interfere with operation of the vehicle.
— it may cause injury to a passenger as a result
of a sudden stop.
! The semiconductor laser will be damaged if
it overheats. Install this unit away from hot
places such as near the heater outlet.
! Optimum performance is obtained when the
unit is installed at an angle of less than 30°.
! When installing, to ensure proper heat dis-
persal when using this unit, make sure you
leave ample space behind the rear panel and
wrap any loose cables so they are not block-
ing the vents.
Leave ample
5 cm
space
5 cm
5cm cm

DIN front/rear mount

This unit can be properly installed using either
front-mount or rear-mount installation.
Use commercially available parts when instal-
ling.
DIN Front-mount
1 Insert the mounting sleeve into the dash-
board.
For installation in shallow spaces, use the sup-
plied mounting sleeve. If there is enough space,
use the mounting sleeve that came with the ve-
hicle.
2 Secure the mounting sleeve by using a
screwdriver to bend the metal tabs (90°) into
place.
1
2
1 Dashboard
2 Mounting sleeve
3 Install the unit as illustrated.
1
2
3
4
5
1 Nut
2 Firewall or metal support
3 Metal strap
4 Screw
5 Screw (M4 × 8)
Section
01
02
5
En