Accessories - Nuna IVVI Mode D'emploi

Accessories

Not all accessories are included on some models.
Use with Nuna Pipa Infant Car Seat
When using with Nuna Car Seat , please refer to the following instructions.
1 To attach adapters, place adapters onto mounts as show. A "click"
sound means the adapter is locked.
2 To attach car seat, place car seat onto adapter as shown.
A "click" sound means the car seat is locked.
3 To remove car seat, lift the car seat upwards
the two stroller release buttons.
4 To remove adapters, lift the adapters upwards while pulling
the two release buttons.
If you have any problems using the car seat,
please refer to the car seat instruction manual.
Remove car seat before folding.
Use Rain Cover
To assemble the stroller rain cover, place it over the stroller seat.
Always check ventilation, especially in hot
weather when the rain cover is on the product.
Always check that the rain cover has been
cleaned and dried before folding.
Do not fold the stroller after assembling the rain
cover.
Do not place your child into the stroller
assembled with rain cover during hot weather.
21
(31)
(34)-1
(35)
(32)
(33)
(34)-2
while pressing
(37)