Loading Nails - Makita AF506 Manuel D'instruction

► 1. Hook
The hook is convenient for hanging the tool temporarily.
Air duster
CAUTION:
Do not aim the ejection port of the
air duster to someone. Also, keep your hands and
foot away from the ejection port. If the air duster
button is accidentally pushed, it may cause a per-
sonal injury.
CAUTION:
Always check your surroundings
before using the air duster. Blown dust or objects
may hit someone.
CAUTION:
Do not connect or disconnect the
air hose while pushing the air duster button.
The air supplied to the tool can also be used as an air
duster. You can clean the work area by pressing the
button on the grip end.
1
► 1. Button
NOTICE:
After using the air duster, the driving force
of the tool will temporarily decline. Wait until the air
pressure recovers in this case.
NOTICE:
Perform a test blow if you use the air
duster immediately after the oil was applied. The oil
may be sprayed with the air.
ASSEMBLY
CAUTION:
before carrying out any work on the tool.
1

Loading nails

CAUTION:
uniform length of nails when loading nails in the
magazine.
1. Pull the sliding door while pressing down the lever
to open the magazine.
► 1. Lever 2. Sliding door
2. Align the tip of nails with the groove of the maga-
zine and push the nails to the firing opening.
► 1. Nail 2. Groove 3. Firing opening
3. Close the sliding door until it is locked.
CAUTION:
of the sliding door. Your finger may be caught in the
sliding door.
CAUTION:
from the magazine and close the sliding door.
6 ENGLISH
Always disconnect the hose
Load the same kind, size and
1
2
3
Do not put your finger on the aisle
When not in use, remove all nails
1
2