Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Problem
9.1 Customer Service
If your appliance is still not working prop-
erly after making the above checks, con-
tact the nearest service centre.
To obtain fast service, it is essential that
when you apply for it you specify the
9.2 Replacing the lamp
WARNING!
Do not remove the lamp cover at
the time of replacement.
Do not operate the freezer if the
lamp cover is damaged or miss-
ing.
10. INSTALLATION
10.1 Positioning
WARNING!
If you are discarding an old appli-
ance that has a lock or catch on
the lid, you must ensure that it is
made unusable to prevent young
children being trapped inside.
The appliance shall have the plug
accessible after installation.
This appliance can be installed in a dry,
well ventilated indoor (garage or cellar),
but for optimum performance install this
appliance at a location where the ambient
temperature corresponds to the climate
Possible cause
There is no voltage in the
mains socket (try to con-
nect another appliance in-
to it).
model and serial number of your appli-
ance which can be found either on the
guarantee certificate or on the rating plate
located on the external right side of the
appliance.
1.
2.
3.
4.
class indicated on the rating plate of the
appliance:
Cli-
mate
class
SN
N
ST
T
Solution
Call an electrician.
Disconnect the mains plug from the
mains socket.
Replace the used lamp with a new
lamp of the same power and specifi-
cally designed for household applian-
ces. (the maximum power is shown
on the lamp cover)
Connect the mains plug to the mains
socket.
Open the lid. Make sure that the lamp
comes on.
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
ENGLISH
27
Publicité
Chapitres
Table des Matières
