Makita PDC01 Manuel D'instruction page 8

NOTICE:
If the height adjustment lever is loose,
tighten the nut of the height adjustment lever.
When tightening the nut, do not tighten it excessively.
Otherwise, the height adjustment lever will not move.
1
► 1. Nut
3. Attach the adapter pocket to the waist belt with the
hook and loop fastener as shown in the figure.
1
► 1. Adapter pocket
NOTE: The adapter pocket can be attached on either
left or right side of the waist belt.
4.
Adjust the width of the shoulder harness using the
width adjustment belt.
► 1. Width adjustment belt
5. Wear the unit, then lock the buckle of the waist
belt, and then adjust the length of the waist belt.
► 1. Buckle
NOTE: You can fold and fix the belt with the hook and
loop fastener as shown in the figure.
► 1. Belt
6. Adjust the length of the shoulder harness.
1
► 1. Shoulder harness
8 ENGLISH
1
1
1