ECOVACS DEEBOT OZMO T8+ Manuel D'instructions page 34

No. Malfunction
DEEBOT fails to auto-empty
14
the Dust Bin.
There is debris in the Dust
15
Container.
DEEBOT leaks dust or debris
16
while cleaning.
17 The Base is dirty.
34
EN
Possible Causes
The Auto-Empty Dust Bin is not installed.
The Dust Bag is full.
The Auto-Empty Outlets on the Auto-Empty
Dust Bin is stuck by debris.
Dust Evacuation Tube is blocked.
Fine particles are absorbed inside the Dust
Container through the Dust Bag.
The Dust Bag is damaged.
The Auto-Empty Outlets are stuck by debris.
Main Brush has debris on it and requires
cleaning.
Solutions
Please install the Auto-Empty Dust Bin with two Auto-
Empty Outlets on the bottom.
Replace the Dust Bag and close the Dust Container Lid.
Uninstall the Auto-Empty Dust Bin and clean the debris
on the Auto-Empty Outlets.
Clean the Dust Evacuation Tube.
Clean the Dust Container Lid and inner wall.
Check the Dust Bag and replace it.
Uninstall the Auto-Empty Dust Bin and clear the debris.
Clean the Main Brush.