Safety Instructions - AudioSonic CL-480 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14

saFetY InstructIons

1. READ INSTRUCTIONS - All the safety and operating instructions should be read
before the unit is operated.
2. RETAIN INSTRUCTIONS - The safety and operating instruction should be
retained for future reference.
3. HEED WARNINGS - All warnings on the unit and in the operating instructions
should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating instructions should be followed.
5. WATER AND MOISTURE - The unit should not be used near water, for example,
near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a
wet basement.
6. VENTILATION – Openings in the device serve its proper ventilation, are
necessary for the operation and prevent overheating. The unit should be
situated so that its location or position does not interfere with its proper
ventilation. Do not place on bed, sofa, rug or similar surface that may block the
ventilation openings, in a built-in installation, such as a bookcase or cabinet
that may impede the flow of air through the ventilation openings.
7. HEAT - The unit should be situated away from heat sources such as radiators,
stoves, or other appliances (including amplifiers) that produce heat.
8. POWER SOURCE - The unit should be connected to power supply only of the
type described in the operating instructions or as marked on the unit.
9. POWER CORD PROTECTION - Power supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against them.
10. NON-USE – During longer periods of non-use please disconnect from mains
power supply and antenna.
11. OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
12. DAMAGE REQUIRING SERVICE - The unit should be serviced by qualified service
personnel when:
a. The power-supply cord or plug has been damaged.
b. Objects have fallen into, or liquid has been spilled into the unit enclosure.
c. The unit has been exposed to rain or moisture.
d. The unit does not appear to operate normally. Only use the units and
controls as described in this manual;
4
Instruction Manual
e. The unit has been dropped, or the enclosure damaged. f. The unit displays
serious changes in its performance.
13. SERVICING - The user should not attempt to service the unit beyond that
described in the user operating instructions. All other servicing should be
referred to qualified service personnel.
14. CLEANING – Disconnect from mains power supply before cleaning. Do not
use liquid or spray cleaners, only use a damp cloth. Follow the care and
maintenance instructions in this manual.
15. LIGHTNING – During lightning and longer periods of non-use please
disconnect from mains power supply and antenna.
16. SAFETY CHECK – After servicing the unit ask the customer service for a safety
check.
17. OVERLOAD – To avoid fire and electric shock do not overload wall outlets and
convenience receptacles.
18. ELECTROSTATIC DISCHARGE- Disconnect from mains power supply and remove
batteries if the unit malfunctions. Reconnect after a short time.
InstaLLatIon
avoid installing the player in areas of:
1. direct sunlight or heating radiators or closed automobiles;
2. high temperature or high humidity;
3. excessive dust;
4. excessive vibration, as the internal parts may be seriously damaged.
stacking:
• Place the unit in an upright position. Do not place the unit on or under amplifiers
or other equipment, which may heat up.
mains power supply:
Heed the following instructions to avoid malfunction, fire, injury and electric shock:
• Check if the mains voltage as shown on the type plate (under the set)
corresponds to your local mains voltage. This unit is designed for AC 230V~50Hz.
• Connect the mains lead to the AC mains socket and the wall outlet.
• To disconnect from wall outlet only pull the plug and not the cable.

Publicité

Table des Matières
loading

Table des Matières