Free Room; Installation - Zanotti DBO Serie Mode D'emploi

6.4 Free room

When installing the unit leave enough free room to allow opening, correct use and easy maintenance in safe
conditions.

6.5 Installation

Place the condensing unit on the floor.
Install the evaporator as follows:
A) Drill the holes in the ceiling keeping the necessary distance from the wall 140 cm.
A
B) Please select the matching cable length for sensor cables and power cables between the evaporating unit
and the condensing unit. (The length must be equal to the length of the pre-charged pipe for the models SPO/GS
and standard length of 10 meters for the models DBO/DBS up to the model 135).
C) Fit a drain line to the condensate water drain connection in the lower part of the evaporator.
Mod.
DBO 140 540
DBO 235 540
DBO 335
DBO 340
B
A B
605
965
540 1370
540 1520
C
Mod
DBO 121
DBO 221
DBO 135
260
B C
260 663
260 1083
250 1663
n°4
Ø 12
A
25