Important; Limitations Of Use - Honeywell FENZY OPTI-PRO Notice D'utilisation

EN
THESE INSTRUCTIONS ARE FOR EXPERIENCED PERSONNEL, TRAINED AND FAMILIAR WITH WEARING BREATHING
APPARATUS
CE regulations apply to full equipment in the CE configurations certified by the notified bodies that have conducted the EC type
examinations.
Failure to comply with this procedure immediately invalidates the CE marking.
To find out all the approved configurations, refer to the configuration tables, available on request.
HONEYWELL RESPIRATORY SAFETY PRODUCTS is continuously endeavouring to improve all its products and the equipment
supplied is subject to change without notice. Consequently, the information, illustrations and descriptions provided in this
document may not be used as a reason to demand the replacement of equipment.
Being in possession of these instructions does not automatically authorise the holder to use breathing apparatus; only
appropriate training will enable safety procedures to be followed.
HONEYWELL RESPIRATORY SAFETY PRODUCTS accepts no liability if the recommendations contained in this document are not
followed.
The recommendations in boxes have the following meanings:
Failure to follow the instructions in boxes could seriously damage the equipment used and put
the user in danger.
Failure to follow the instructions in boxes could lead to incorrect use of the equipment and result
in damage to the equipment.
PROTECTION AND USAGE CATEGORIES
FENZY OPTI-PRO masks comply with the requirements or European standard EN136 CL3.
FENZY OPTI-PRO masks can be used with self-contained open-circuit compressed air breathing apparatus approved in accordance with the
requirements of European standards.
FENZY OPTI-PRO masks with connection straps are intended for use with CE certified fire brigade helmets type F1, F1A and F1SF.
These instructions are only intended for use with CE certified FENZY OPTI-PRO masks
complying with the European Standard EN136 CL3.
The FENZY OPTI-PRO half-face masks must only be used in accordance with the instructions
given here. Incorrect use might result in danger to life or limb.

LIMITATIONS OF USE

•
The FENZY OPTI-PRO mask may never be used on its own. It must be used with CE-certified respiratory protection equipment.
•
The air supplied by the associated equipment must be breathable quality.
•
Limitations of use of the entire respiratory protective equipment depend on the actual device attached. Please consult the user manual
delivered with this equipment for details.
•
Please consult the supplier, if you have any doubt as to whether the respirator is suitable for the work at hand.
INSTRUCTIONS FOR USE
Unpacking instructions
•
Carefully remove the mask from the packaging.
•
Check that the equipment is complete and free of damage. Immediately contact your supplier in case of damage or missing items. The
mask must not be used if it is damaged or incomplete.
Storage
•
Do not store in temperatures below -20° C or above +50° C or in an atmosphere with a relative humidity above 90%.
•
Store the mask in its original packaging or in a sealed container so that it is protected from sunlight and dust.
Pre-use checks
•
Read the user instructions for the device attached to the mask.
•
Make sure that the mask is not damaged.

IMPORTANT

IMPORTANT
NOTE
EN-1