Storing The Machine - Stihl SR 430 Notice D'emploi

Masquer les pouces Voir aussi pour SR 430:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
If strainer is dirty:
Insert a suitable tool (e.g.
N
screwdriver) in the two recesses
(arrows) to loosen the strainer (1)
Pull the strainer (1) upward and out
N
of the solution container
2
Clean the strainer (2) with clear
N
water and a brush
After Dusting and Spreading – SR 450
only
Run the unit until the solution
N
container is completely empty
Close the dosage lever
N
Shut off the engine – see "Starting /
N
Stopping the Engine"
Rinse and clean the solution
N
container with clear water
26
Dispose of any residual rinsing
N
solution in accordance with
environmental requirements –
follow instructions of the chemicals
manufacturer
Allow the machine to dry with the
N
cap removed

Storing the Machine

Store the machine in a dry, high or
N
locked location sheltered from frost
– out of the reach of children and
other unauthorized persons.
For periods of 3 months or longer
Drain and clean the fuel tank in a
N
well ventilated area.
Dispose of fuel properly in
N
accordance with local
environmental requirements.
Run the engine until the carburetor
N
is dry – this helps prevent the
carburetor diaphragms sticking
together.
Thoroughly clean the machine – pay
N
special attention to the cylinder fins
and air filter.
Do not expose the container to
N
direct sunlight for unnecessarily
long periods. UV rays can make the
container material brittle, which
could result in leaks or breakage.
SR 430, SR 450

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Sr 450

Table des Matières