Stihl SR 430 Notice D'emploi page 18

Masquer les pouces Voir aussi pour SR 430:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Warm engine (warm start)
4
Press in the choke knob (4) and turn
N
it to o.
Also use this setting if the engine has
been running but is still cold.
16
Cranking
Place the unit securely on the
N
ground and make sure that
bystanders are well clear of the
nozzle outlet.
Make sure you have a firm footing:
N
Hold the unit with your left hand on
the housing and put one foot against
the base plate to prevent it slipping.
Pull the starter grip slowly with your
N
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope to full
length – it might otherwise break.
Do not let the starter grip snap back.
N
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
Continue cranking until the engine
N
runs.
As soon as the engine runs
4
Pull the throttle trigger – the choke
N
knob (4) automatically returns to the
run position (e).
At very low outside temperatures
Open throttle slightly – warm up the
N
engine for a short period.
SR 430, SR 450

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Sr 450

Table des Matières