To Display The Indicators During Playback - Display - Sony HANDYCAM DCR-DVD100E Mode D'emploi

Playing a disc on your camcorder
To display the indicators during playback – Display
Press DISPLAY/BATT INFO on your camcorder, or press DISPLAY on your Remote
Commander.
The indicators appear on the LCD display.
To make the indicators disappear, press DISPLAY/BATT INFO or DISPLAY again.
To display date/time and various settings
Your camcorder automatically records not only images on the disc but also the
recording data (date/time or various settings when recorded) (Data code).
To display both the date/time and the data code, set
[DATE/CAM] in the SETUP display.
To change date/time and various settings
Press DATA CODE on the Remote Commander during playback.
The display changes as follows:
date/time t various settings (SteadyShot, white balance, gain, shutter speed, aperture
value, exposure mode) t no indicator
Date/time
1 1 2003
Date
58
-GB
DISPLAY button
40min 0:00:18
-R
0003
VIDEO
11:23:45
Time
DISPLAY/BATT INFO button
(OTHERS) – [DATA CODE] to