Hama EWS-810 Mode D'emploi page 6

5. Installation
Note – Installation
• We recommend initially placing the base and measuring stations in the intended
locations without installing them and making all the settings described in 6. Operation
– to do.
• Only install the stations once the appropriate settings have been made and a stable
wireless connection is established.
Note
• The wireless transmission range between the measuring and base stations is up to 30
m in open spaces.
• Before installation, ensure that wireless transmission will not be disrupted by
interference or obstacles like buildings, trees, vehicles, high-voltage lines, etc.
• Before the nal installation, ensure that there is su cient reception between the
intended installation locations.
• When installing the measuring station, ensure that it is protected from direct sunlight
and rain.
• The international standard height for measuring air temperature is 1.25 m (4 ft) above
ground.
Warning
• Buy special or suitable installation material from a specialised dealer for wall-mounting.
• Ensure that no faulty or damaged parts are installed.
• Never apply force during installation. This could damage the product.
• Before installation, ensure that the chosen wall is suitable for the weight to be
mounted, and make sure that there are no electrical wires, water, gas or other lines at
the installation site on the wall.
5.1. Base station
• Use the base to position the base station on a level surface.
5.2. Measuring station
• You can also position the measuring station on a level outdoor surface.
• We recommend installing the measuring station securely on an outdoor wall using the
opening (24).
5