Setting The Alarm Time; Activating/Deactivating The Alarm - Hama RC 610 Mode D'emploi

• Press and hold the ▲ button (6) for 3 seconds to switch the display between local and time
zone-shifted time (
Selecting 12 or 24-hour format
• Repeatedly press the ▲ button (6) to switch between 12 and 24-hour time format (1/2).
Displaying seconds/weekday
• Repeatedly press the
5.3. Alarm
Note – Alarm
The alarm time always depends on the time displayed, that is, the local or time zone-shifted time
( ).
F

Setting the alarm time

• Move the slide switch (5) to the ALARM SET position to manually set the alarm time (2).
• Press the ▲ button (6) or the
• Move the slide switch (5) to the

Activating/deactivating the alarm

• Repeatedly press the ALARM ON/OFF switch (4) to enable or disable the alarm.
• When the alarm is enabled, the ALARM ON/OFF switch (4) protrudes slightly above the housing.
The alarm time (2) and the alarm icon
• When the alarm is disabled, the date is displayed in place of the alarm time.
Alarm mode exit/snooze function
• If the alarm is triggered, the alarm symbol
• Press the ALARM ON/OFF switch (4) to stop the alarm. Otherwise, it will stop automatically after
2 minutes.
• Press the ALARM ON/OFF switch (4) again immediately after turning off the alarm to re-enable
it for the next day.
).
F
button (7) to toggle between seconds and weekday on the display.
button (7) to set the hours and minutes of the alarm time.
position to save your settings and return to normal mode.
are shown in the display.
will begin to flash and an alarm will sound.
7