Important Safety Instructions - Riester ri-thermo tymPRO Mode D'emploi

IMPORTANT SAFETY INSTRUCTIONS

READ THIS BEFORE USING AND KEEP THESE INSTRUCTIONS
The following basic safety precautions should always be taken.
1. Close supervision is necessary when the thermometer is used by,
on, or near children, or handicapped persons.
2. Use the thermometer only for the intended use described in this
manual.
3. Do not use the thermometer if it is not working properly, or if it has
suffered any damage.
4. Keep the sensor end clean and free of debris. See Maintenance
section for instructions.
5. Do not use ethylene oxide gas, heat, autoclave, or any other harsh
methods to sterilize the device.
6. If coming from an environment of warmer or cooler temperature
or after a period of exertion, allow the user and the thermometer
to acclimate to room temperature for 20 minutes prior to taking a
measurement.
7. As the body site for measurement may be affected by sweat, oil
and the surrounding temperature, the reading shall be taken as a
reference only.
8. Do not use in presence of flammable anesthetic mixtures.
9. Do not use accessories which are not supplied or recommended
by the manufacturer. Do not try to modify the device to prevent any
dangers.
10. Proper maintenance is essential to the longevity of your device.
This thermometer has been calibrated at the factory. If you follow
the instructions, you don't need to adjust it regularly. However, if
you are concerned about the accuracy of measurement, please
contact the local customer service or place of purchase for help.
11. Always contact the manufacturer or the manufacturer's
representative to report unexpected operation or event. Do not try
to fix it by yourself.
12. When using the thermometer, stay away from electromagnetic
radiation, such as the mobile in use.
EN-3