Labeling Recordings; On The Recorder - Sony MZ-R55 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Labeling recordings

You can name tracks during playback,
discs during stop, and both during
recording. Each name can be as long as
200 letters.
Each disc can hold up to 1700
alphanumeric letters during playback or
stop, and 500 alphanumeric letters during
one recording.

On the recorder

MODE
DISPLAY
= +
p
(
Labeling a disc during stop
1
Insert a disc.
To label a disc that is already in the
recorder, press p to stop.
2
Press EDIT/ENTER.
"
: Name" flashes in the display.
3
Press EDIT/ENTER again.
The disc is ready to be labeled.
4
Press = or + repeatedly to select
a letter and press ( to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
24-
GB
EDIT/ENTER
P
VOLUME +/–
T MARK
To
Press
P
Switch between capital
letters, small letters, and
marks / numbers.
Move the cursor to the
VOLUME +/–
left or right.
=/+
Change the letter to the
one before / next one.
DISPLAY
Insert a blank space to
type in a new letter.
Delete a letter and move
MODE
back all following letters
to the left.
p
Cancel labeling.
Cancel labeling.
T MARK
5
Repeat step 4 and enter all characters
of the label name.
6
Press EDIT/ENTER.
The track or disc is labeled.
Labeling a track during playback
1
Insert a disc and play the track you
want to label.
2
Press EDIT/ENTER.
"
: Name" flashes in the display.
3
Press EDIT/ENTER again.
The track is ready to be labeled.
4
Follow steps 4 to 6 of "Labeling a disc
during stop" above.
Labeling a track or a disc during
recording
1
Press EDIT/ENTER during
recording.
"
: Name" flashes in the display.

Publicité

Table des Matières
loading

Table des Matières