Getting Started; Other Functions - AEG KM4 Série Mode D'emploi

ENGLISH
Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Motor head (tiltable)
B. Speed selector
C. Housing
D. Tilt head locking lever
E. Working light
F. Attachment hub
G. Attachment shaft
H. Stainless steel bowl
I. Bowl clamping plate
J. Non-slip feet
Pictures pages 2-4

GETTING STARTED

1
Before using the appliance for the first time: Unplug the appliance. The Wire whip, Meat grinder* and Slicer/Shred-
der* should only be washed by hand in warm soapy water. The bowl, Flat beater, Dough hook, SoftEdgeBeater™* and
PerfectRiseLid™* are dishwasher-proof. Clean the motor unit with a damp cloth.
Caution: Never immerse the motor unit in water! Let all parts dry thoroughly.
2
Place the appliance on a flat surface. Tilting the Motor head up: Move the Tilt head locking lever to "Unlocked" with
one hand, tilt the Motor head up with the other hand. Once in up position it locks. Warning: Keep fingers and hands
away from areas with movable parts.
3
Move Speed selector to "OFF". Place the Stainless steel bowl on the bowl clamping plate. Move the bowl clockwise
to lock into position. Warning: Never operate appliance with the attachments wire whip, Flat beater, Dough hook or
SoftEdgeBeater™* unless the bowl is in place, and the motor head is down.
4
Place an attachment on the Attachment shaft: Align the slot at the top of the attachment with the pin on the At-
tachment shaft. Push the attachment up and turn it counterclockwise until the pin is locked into position. To remove
the attachment, move it clockwise and pull off.
5
Tilting the Motor head down: Move the Tilt head locking lever to "Unlocked" with one hand, tilt the Motor head
down with the other hand. Insert the plug in the main socket.
6
Move the Speed selector from "OFF" to desired speed (1-10). Once mixing is complete, turn the Speed selector to
"OFF" and unplug the appliance.
7
Work light and Power indicator light: If the appliance is plugged in and a speed is selected, a blue LED lights up
around the Speed selector. A working light will also light up over the working area. If the Speed selector is moved to
"OFF", the working light will automatically shut off after 3 min.
8
Note: If the Speed selector is already turned on before the appliance is plugged in, both the blue Speed selector LED
light and the Working light will flash OFF and ON to let you know the Speed selector has been left on. Turn the Speed
selector to "OFF" and the lights will stop flashing. Then resume operating normally.

OTHER FUNCTIONS

9
How to use the coated SoftEdgeBeater™ * tool:
The SoftEdgeBeater™ is perfect for creamy mixtures and toppings.
The silicone edges of the beater, gently wipes the sides on the bowl helping to incorporate all the ingredients in the
mixture and to ensure even consistency throughout the mixing process.
10
Note: Do not use the coated SoftEdgeBeater™ * with heavy mixtures such as dough, use the dough hook tool
instead. For hard ingredients like dry fruits, shells or bones use the coated flat beater instead.
11
How to use the PerfectRiseLid™ *:
The PerfectRiseLid™ isolates and helps to build up the humid environment for the dough to rise in proper condition.
www.aeg.com
K. Power cord
L. Wire whip
M. Coated flat beater
N. SoftEdgeBeater™*
O. Coated dough hook
P. Meat grinder*
Q. Slicer/Shredder*
R. PerfectRiseLid™
S. Pulse function*
* Certain models only
6